Home
MACHINES
Accessories for PU machines
Container For Colours
MACHINES
Accessories for PU machines
Container For Colours
Container For Colours
Device serves for transport and dosing of colours to the mixing head at low-pressure PU mixing machines
- mixing head must be with the possibility of inlet for colour concentrate
- if the head is not equipped with inlet for colour concentrate, it can be ordered individually
- this device can be used for pouring machines made by other producer
Without- pressure containers
- volume of each container is 50 l, are equipped with stirrers with electromotor
- are heated by electric heating element
Colour dosing
- recycling system for transport of colours
- two accurate dosing gear pump with cycling gearboxes and electromotors
- control of revolutions of dosing pumps by frequency converter
- components are cleaned before entering the pumps
- reading of colour pressure on delivery with blocking of run of the pumps during exceeding the maximal value
- valve for control of colour pressure is placed on each return pipe
Distribution board
- setting up and control of temperature for each container individually
- blocking of running during the deviation of actual temperature and set temperature
- displaying of pressure behind the dosing pump for each colour individually
- automatic switch off of dosing pumps during exceeding the maximal pressure
- displaying of the discharge in ml/s for each colour individually
- setting up of the discharge by multirevolution potentiometer
- switch on/switch off electromotor of stirrer of each container individually
- switch on/switch off dosing pump for each colour individually
Technical Parameters
| Dimensions ( l x w x h ) | 1425x600x1400 mm |
| Number of colours | 2 |
| Volume of each container | 50 litrů |
| Power of each pump | od 0,13 do 1,26 ml/s |
| Temperature of colour | 20 až 60 °C |
Change of technical parameters reserved.
![]()
Photogallery![]()
Catalog CZ![]()
Catalog EN
| < Prev | Next > |
|---|



